Difference between revisions of "EnableStatusArea"

From WikiPrizm
Jump to navigationJump to search
(Created page with "{{syscall | name = EnableStatusArea | index = 0x02B7 | signature = void EnableStatusArea(int opt) | header = fxcg/display.h | parameters = * '''opt''' - If 0 or 2, enables the...")
 
 
(2 intermediate revisions by 2 users not shown)
Line 4: Line 4:
 
| signature = void EnableStatusArea(int opt)
 
| signature = void EnableStatusArea(int opt)
 
| header = fxcg/display.h
 
| header = fxcg/display.h
| parameters = * '''opt''' - If 0 or 2, enables the status area. If 1, no operation is performed. If 3, the status area is disabled.
+
| parameters = * '''opt''' - If 0 or 2, enables the status area. If 1, no operation is performed. If 3, disables the status area.
 
| synopsis = Enables or disables the status area.
 
| synopsis = Enables or disables the status area.
| comments = Influences the int system variable at 0x8804F52C (fx-CG20 OS 01.02.0200).
+
| comments = Influences the int system variable at 0x8804F52C (fx-CG20 OS 01.02.0200). On OS 02.00 it is now 0x8804F5EC. You should not attempt to use these addresses directly to enable or disable the status area, because as one can see, the value changes its location in memory between versions of the OS.
 
}}
 
}}

Latest revision as of 14:56, 5 December 2014


Synopsis

Header: fxcg/display.h
Syscall index: 0x02B7
Function signature: void EnableStatusArea(int opt)

Enables or disables the status area.

Parameters

  • opt - If 0 or 2, enables the status area. If 1, no operation is performed. If 3, disables the status area.

Comments

Influences the int system variable at 0x8804F52C (fx-CG20 OS 01.02.0200). On OS 02.00 it is now 0x8804F5EC. You should not attempt to use these addresses directly to enable or disable the status area, because as one can see, the value changes its location in memory between versions of the OS.