Difference between revisions of "EnableStatusArea"

From WikiPrizm
Jump to navigationJump to search
Line 6: Line 6:
 
| parameters = * '''opt''' - If 0 or 2, enables the status area. If 1, no operation is performed. If 3, disables the status area.
 
| parameters = * '''opt''' - If 0 or 2, enables the status area. If 1, no operation is performed. If 3, disables the status area.
 
| synopsis = Enables or disables the status area.
 
| synopsis = Enables or disables the status area.
| comments = Influences the int system variable at 0x8804F52C (fx-CG20 OS 01.02.0200).
+
| comments = Influences the int system variable at 0x8804F52C (fx-CG20 OS 01.02.0200). On OS 2.00 it is now 0x8804F5EC. In other words you should not attempt to access this address directly doing so many not work on a different version of operating system due to the fact that the address is not used for this.
 
}}
 
}}

Revision as of 21:24, 4 December 2014


Synopsis

Header: fxcg/display.h
Syscall index: 0x02B7
Function signature: void EnableStatusArea(int opt)

Enables or disables the status area.

Parameters

  • opt - If 0 or 2, enables the status area. If 1, no operation is performed. If 3, disables the status area.

Comments

Influences the int system variable at 0x8804F52C (fx-CG20 OS 01.02.0200). On OS 2.00 it is now 0x8804F5EC. In other words you should not attempt to access this address directly doing so many not work on a different version of operating system due to the fact that the address is not used for this.